Mesin Press Bodem Multi Silinder

Mesin Press Bodem Multi Silinder


Hydraulic Dished Head Configuring Machine

 
Mesin Press Bodem Multi Silinder

Silinder Mesin Press Bodem

Contoh Hasil Produksi Mesin Press Bodem Multi Silinder


FEATURES

By using the common tools compacted with the module on the workpiece, the affusion is made to the module.
The pressure can help the realization of the configuration of
the seal head.
The rubber seal belt is used to pressurize the workpiece
.During the procedure, there is no need to change the module. Adjusting the size of the module according to your expected size will be all right.

The hydraulic system is hanged on the top. The platform on the top has a guiding slot, where the hydraulic pump can move freely to suit different sizes of the workpieces

The hydraulic plump has multiply purposes and convenient operation characteristics with powerful pressure. And its accessories can also be quite easy to purchase.


TECHNICAL SPECIFICATIONS
Model ZX-2700
Maximum Diameter 2700mm
Minimum Diameter 1200mm
Thickness of workpiece 
Q235A :8mm 
16Mn :6mm
SUS304 :6mm
Alumunium 10mm
Dished end shape Circle,ellipse ,irregular circle
Height of forming ≤200mm(According to Diameter and thickness of workpiece)
Max Pressure of Working About 120T
Max Hydraulic system Working pressure 27 Mpa
Cylinder amount 24Sets
Way of forming Hydraulic Mode
Hydraulic medium Emulsion(cyclic utilization)
Sealing medium Felt seal 
Forming medium recovery mode Air pressure type
Workpiece lifting mode Hydraulic Mode
The maximum weight lifting workpiece 1.5T
Upper mold Offered by customer
Input Voltage AC 380V 60Hz
Weight About 28T
Overall dimensions 3460 mm×3100 mm×2800 mm
Machine Power 28 KW

Main configuration 
No.   Name                                  Brand                  Remarks 
1      Motor                                   Siemens       cast iron, insulation grade:F
       2      Pressure gage                       AFRISO
       3      Hydraulic cylinder sealing    NOK
          4      cable                                      Igus
       5      Hydraulic valve                    LIXIN
       6      Gear pump
       7      Plunger pump                       China
       8      Hydraulic Hose                     China

Jika anda tertarik atau berencana membeli Mesin Press Bodem Multi Silinder atau sekedar sharing informasi Tipe dan Harga Mesin Press Bodem Multi Silinder, anda dapat berdiskusi dengan saya.
Saya akan dengan senang hati memberikan informasi Tipe dan Harga Mesin Press Bodem Multi Silinder yang sesuai terlebih dahulu dengan saya.

Hubungi

Kurniawan, Saldy

HP: 0813-45026234 (WA) atau 0858-22116234

atau email ke kurniawan.saldy@gmail.com.

Anda juga bisa mengunjungi www.sheetmetalmachine.blogspot.com atau www.mesinbending.blogspot.com

Mesin Bodem untuk Mobil Tangki

Mesin Bodem Mobil Tangki Bergerak


No Template Irregular Dished Head Folding Machine / Mesin Flanging Irregular
Mesin pengurut irregular untuk menegakkan bibir tutup tangki

Contoh Foto  mesin bodem untuk menegakkan bibir tutup tangki

Mesin Flanging






FEATURES

①adopts the advanced PLC programme input technology and micro- electronics technology
②applicable for different kinds of pressure containers with easy operation, high efficiency and folding quality
③ improve not only the collective manufacture with high and stable quality but also the working environments
④The suitable objects: the automatic fixed distance gland edge
folding of regular and irregular tanks, especially suitable for different kinds of shell tanks processing machines
⑤The product has won the national patent, and has passed the CE
certification.

TECHNICAL SPECIFICATIONS

Model XBJ-3000
Maximum Diameter (mm) 3000mm
Minimum Diameter (mm) 1200mm
Minimum Circular Radius (mm) ≥300mm
Folding Speed(Linear  Velocity ) (mm/min) 1000-2000mm/min
Power Supply Ac 380V 60HZ
Upper pressure roller radius R20
Main Machine Power 8KW
Control way PLC
Applicable scope of sheet metal
Material Q235, stainless steel, Aluminium Thickness 2-8mm
Spinning height 25mm-50mm (According to thickness of workpiece; if the thickness is 2mm, the spinning height no more than 25mm)
Best suitable workpiece is for Flat workpiece, round plump workpiece
Plump dished end Radius  ≤180mm

Mesin Bodem ini mampu melakukan pekerjaan menegakkan bibir tutup tangki untuk tanki bertekanan, sangat cocok untuk pembuatan tangki bertekanan di kendaraan bergerak seperti diatas truk.


Jika anda tertarik atau berencana membeli Mesin Bodem Plat atau Mesin Penegak Bibir Tutup Tangki atau sekedar sharing informasi Tipe dan Harga Mesin fiber laser, anda dapat berdiskusi dengan saya.
Saya akan dengan senang hati memberikan informasi Tipe dan Harga Mesin Bodem Plat atau Mesin Penegak Bibir Tutup Tangki yang sesuai terlebih dahulu dengan saya.
Hubungi

Kurniawan, Saldy

HP: 0813-45026234 atau 0858-22116234

atau email ke kurniawan.saldy@gmail.com.

Anda juga bisa mengunjungi www.sheetmetalmachine.blogspot.com atau www.mesinbending.blogspot.com










Lowongan Sales Engineer untuk Sheet Metal Machine



Dibutuhkan segera Sales Engineer untuk Machinery (Divisi Sheet Metal dan Divisi Metal Cutting).


Persyaratan :
1. Pria / Wanita
2. Usia antara 22-50 tahun
3. Pendidikan D3/S1 Teknik
4. Pengalaman tidak diutamakan.
5. Mau belajar dan berpikiran terbuka.
6. Jujur dan kreatif.
7. Memiliki SIM A / C
8. Menguasai Bahasa Inggris (Diutamakan)
 




 
Apa yang akan didapatkan?
1. Gaji pokok
2. Komisi Penjualan (persentase penjualan)
3. Kendaraan operasional (Mobil / Motor)
4. Jalan-jalan ke Luar Negri (Training, visit principal dll)
5. Asuransi Kesehatan (diluar BPJS)
6. dll. 






 
Kenapa harus melamar?
1. Income tanpa batas tergantung kinerja.
2. Bertemu dengan banyak orang sukses (Owner/pemilik perusahaan, Orang-orang di level managerial, Principal pembuat mesin dll.)
3. Peluang tanpa batas.
4. Brand / Merk Ternama di bidangnya.




   





Cara melamar?
Kirim lamaran disertai CV lengkap dan foto berwarna terbaru ke Saldy Kurniawan dengan alamat,



PT Tecno Mesin Utama
Jl. Boulevard Raya Blok CN3 No. 7-8, Kelapa Gading, Jakarta Utara 14240 - Indonesia
Telp.: 021-45865621, 29078944, 29578476
atau email ke:
 saldy@pt-tmu.co.id


"Always believe that something wonderful is about to happen."

Mesin Bodem / Dish End Machine

DISH END PRESS BMB-P-400x4000


DISH END PRESS BMB-P-400x4000

TECHNICAL SPECIFICATIONS

Piston working stroke
500 mm
Uprights distance
4100 mm
Max. Working pressure
250 bar
Nominal force
400 tons
Piston descent speed max.
8 m/min
Piston working speed max.
110 cm/min
Piston fast return speed max.
8m/min
Total power
77 kw
Max. Length mm
6.000
Max. Width mm
5.600
Max. Height mm
4.000
Weight (appr.) kg
66.000
Specifications and machines appearances are subject to change without notice.


STRUCTURE

·       The machine frame built of high strength materials. All body parts welded and stress relieved prior to machining in order to meet tight manufacturing tolerances for appropriate assembling and maintenance
·       The dies made of special grade of material and heat treated.
·       All groups undercoated of special quality of chemical for high corrosion resistance
·       Safety barriers at top of the press body and stair for maintenance.
·       All cylinder bodies and pistons are hardened and tempered, chrome plated and grounded
·       Low number of greasing points by using self-lubricated components and besides that long lifetime

 

COMPONENTS

The machine is equipped with a colored Touch Panel SIEMENS.  Easy to operate main cylinder, manipulators positions, to stop/start at any position, and diagnostic/alarms of all the functions. All controls can be seen on screen and buttons on control pulpit. Electric motors to power hydraulic pumps.

STANDARD EQUIPMENT

Main groups;
-        Mobile control pulpit
-        Press body
-        Front manipulator
-        Rear manipulator

·       Fully hydraulic machine
·       Die holder unit on the main cylinder x1
·       Speed fast-slow selection of the main cylinder
·       Main cylinder digital position read out
·       Working pressure manometer x1
·       Hydraulic components Parker or equivalent
·       Electrical components Siemens, Telemecanique, Schneider
·       All the controls on control pulpit by only one operator
·       Independent control of the manipulators, synchronized with main cylinder movements x2
·       Motorized rolls in order to rotate the plate x2
·       Counting and presetting of the main cylinder movements and plate rotation
·       Air cooling system for hydraulic oil x2
·       Stair for cylinder maintenance
·       Emergency button
·       Instruction Manual in English, hydraulic and electric projects, foundation drawing and all other tools required to operate the machine

TERMS AND CONDITIONS


WARRANTY:
-        12 months or 2500 working hours (which comes first) after the first date of installation completed. 18 months from the shipment date from manufacturer factory. The machine is under warranty of any defective materials, workmanship or standard equipment.
-        Any reparation by any other party without written approval of manufacturer breaks the warranty. Manufacturer is the only one responsible to fix the problem in such cases and this service cost will be charged to customer.
-        If any part change is required under warranty period, it is subjected to same warranty and its warranty starts at the date of mounting.
-        If customer requires a service technician/engineer from the manufacturer during the warranty period, this service price will be quoted and agreed with customer.
-        Any part which slides are subject to wearing so is not covered by warranty
-        The defects caused of purposeful or inaccurate usage of machine is not under warranty. This will be evaluated by the manufacturer during the service time by the responsible technician/engineer.
-        Manufacturer is not responsible for any monetary loss of the customer due to machine breakdown even the reparation is under warranty.
-        If the reparation requires a functional test or trial after the completion, the cost of required plate/piece under responsibility of the customer. If one trial is not sufficient to check, more trials can be required by manufacturer in the same condition.

DELIVERY:  
-        Price includes the delivery, the manufacturer will inform to customer about the date of shipment and delivery. The customer should warn to manufacturer in written for any law, rule, vacations, road construction work or any other issue at the customer country which may affect the delivery date. Otherwise, the manufacturer is not responsible of any delay or penalty.
-        The insurance cost is under responsibility of the customer if required. The manufacturer is not responsible for any damage occurred during the transportation.
-        The manufacturer doesn’t accept any penalty if it not specified and agreed on the order confirmation.
-        In case the customer requires functional test at the manufacturer location prior to shipment, the labor, plate, energy or other expenses will be charged to customer. This will be quoted and agreed with the customer prior to test.

INSTALLATION AND TRAINING:
Foundation drawing to be sent to customer after the order confirmed.
User manual will be given customer after the installation completed.
The electric and air line connections and wiring, their channels, covers which may require for open foundation zones etc., should be provided by the customer. 


Untuk pasar Indonesia AKYAPAK - AKBEND menunjuk perusahaan saya PT Tecno Mesin Utama sebagai Agen Sales serta Service
Selain itu PT Tecno Mesin Utama memegang keagenan untuk servis dan sales untuk beberapa brand ternama seperti
  • AKYAPAK (Plate Bending Roll Machine, Profile Bending Roll Machine, CNC Beam Drilling Machine, CNC Plasma Cutting Machine, CNC Flange Drilling Machine, CNC Plasma Oxy Drilling Machine, Self Align Rotator, Positioner, Coloum Boom, dll)
  • YSD (Press Brake, Guillotine Shearing, Iron Worker, Power Press, Notching, dll.)
  • BAYKAL (Press Brake, Swing Beam Shear, Laser Cutting, Turret Punching, Index Punch, Plasma Cutting, Water Jet dll.)
  • JFY (CNC Turret Punch)
  • JORNS AG (CNC Folding and Shearing Machine)
  • WOOJIN (Panel Punching Press, Bush Bar Bender, Bush Bar Cutter, Bush Bar Punch, dll)
  • GOLDEN LASER (YAG Laser, Fiber Laser and CO2 Laser Machine)
  • COSEN (Band Saw, Billet Saw, Vertical Saw)
Jika anda tertarik atau berencana membeli mesin-mesin diatas, anda dapat mendiskusikannya terlebih dahulu dengan saya.
Hubungi nomor HP: 0813-45026234 atau 0858-22116234
atau email ke kurniawan.saldy@gmail.com atau saldy@pt-tmu.co.id