Mesin Bandsaw COSEN tipe SH250R



“COSEN” Semi-Automatic Hinge-Type Horizontal Bandsaw Model: SH-250R 


The SH-250R is a large capacity; compact size machine requires less floor space when compared to other machines with the same capacity (10"). Featuring power roller feeding, hydraulic powered saw head,  this economical automatic band saw is an excellent choice for a diverse job shop

MACHINE SPECIFICATIONS    

MAXIMUM CUTTING
CAPACITY
Round
250 mm (10”)
Square
230 x 230 mm (9” x 9”)
Rectangle
230 H x 250 W mm (9” x 10”)
SAW BLADE
Speed
50Hz: 19, 31, 48, 78 mpm (62, 101, 157, 256 fpm)
60Hz: 23, 37, 58, 93 mpm (75, 121, 190, 305 fpm)
Size
3350 x 27 x 0.9mm  (132” x 1” x 0.035”)
Guide
Carbide Blade Guide
Cleaning
Powered Wire Brush
MOTOR OUTPUT
Saw blade
2 HP ( KW)
Vise Roller
1/4 HP (0.18 KW)
Hydraulic
1/4 HP (0.18 KW)
Coolant
1/8 HP (0.1 KW)
TANK CAPACITY
Hydraulic oil
15L
Coolant
40L
FEEDING
Power roller vise
NET WEIGHT
480 kg
GROSS WEIGHT
580 kg
Floor Space
1820 x 900 x 1040 mm



SH-250R Machine Features
Machine Structure:
Oversized hydraulic cylinder supports the rugged saw frame with heavy-duty universal ball joint accomplishing smooth & consistent down feed through the entire cutting cycle.  Special wear resistant DU bushing works inside the precision bore solid cast hinge and ground pivot shaft to ensure durability and long useful life.
Blade Drive:
The gearbox is specially designed to accept high lateral pressure. the Cosen design accepts more pressure during operation and will not create thermal distortion, providing long gearbox life under production conditions.
Step variable blade speed
Blade Guidance & Lubrication System:
Carbide blade guides with roller bearings pre-align the blade before entering carbide blade guides. This feature reduces wear on blade guides and blade, thus enhancing blade life.
The rigid guide arms are mounted on an extra wide dovetail slide for more solid and supportive surface. It also allows easy adjustment of guide arms.
One roller supports the blade from the top, giving it extra penetrating force. The carbide guides are relieved to allow coolant flow to lubricate and cool the blade as well as work piece.
Integral coolant system.
Adjustable  powered wire brush effectively removes chips from blade gullet.
Control & Automation:
The feed rate may be adjusted by setting the dial between 0 and 10. It allows adjustment feed rate according to the varying material types, which results in longer blade life, shorter cutting times, and better finishes.
A work height selector is located over the hydraulic cylinder and is used to adjust the blade to minimum clearance height over the work.
The control panel is clearly arranged and conveniently located on front of the machine, eliminating the need for the operator to reach over a moving blade. 
Out-of-stock switch
“Save-a-Blade.” At the end of a cut, when the blade is at its lowest position, the stock automatically backs off from the blade slightly to allow the blade to clear the work on its return to the starting position. This special “Save-a-Blade” feature prevents tooth deformities by eliminating this undesirable abrasion.
Preset piece counter with automatic power off
Safety:
Interlock design in electrical and hydraulic system prevents the saw from accidental start
Conduits protect all exposed electric wiring and hydraulic circuits.  All access doors and blade guards are painted alert orange for increased safety awareness.
Standard Accessories:
Adjustable material stop
Additional flushing hose for cleaning
Bi-metal saw blade
Tool Box with tools, leveling pads, and an additional wire brush
Operation & parts manual

 Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com atau Saldy@pt-tmu.co.id, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.