Jual Mesin Fabrikasi Plat Logam: 3 roll

Mesin Bending Roll Profile Siku Hollow H Beam U Channel Strip merk AKYAPAK

TECHNICAL SPECIFICATIONS OF APK 101 PROFILE BENDING MACHINE

Section Modulus	45 -80 cm3
Rolls Ø	315 mm
Shaft Ø	100 mm
Motor Power	11 KW
Bending Speed	5.4 m/min
Length	1435 mm
Height	1680 mm
Width	1220 mm
Weight	2240 kg

· Data based upon steel 240 N/mm² Yield Point.

The shafts are made of NiCrMo alloyed steel. The surface of the rolls are hardened by induction technique.

All types of the machines are produced in our own facilities. AKYAPAK machines are designed by our engineers with C.A.D. technologies. The shafts, rolls and gear system of the machine are produced by CNC machines. After first quality control, the components assemble by professional staff carefully. Then the machine is tested by quality control staff and is painted according to customer request.

STANDARD EQUIPMENT

· Machine is fabricated of steel construction.

· Rolls are driven by hydraulic motor + reducer.

· Hardened rolls.

· Shafts made of special steel, hardened and grounded.

· 1 directional manual adjustable guide rolls.

· Horizontal – vertical working.

· Torque limiting device protecting from overload during bending.

· Lower rolls hydraulic moveable up and down.

· Digital display for lower rolls.

· Separate and moveable control panel.

· Hydraulic and electric installation Bosch, Parker, Siemens, Telemecanique.

· Manuel lubrication.

· 400 Volt / 50 Hz.

· Suitable for “CE”.

Use and adaptation of Akyapak equipment is very simple.

We have in stock all kinds of hydraulic, electric, bearing and gearboxes spare parts in case of machine failures and also easy and quick services for all products are available.

All spare parts in Akyapak equipment are produced by such worldwide known suppliers as Siemens, Bosch, Rexroth, and Parker.

All Akyapak machines are confirmed with CE norms.

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

Mesin Bending Plat Hidrolik (Plate Bending Machine) merk AKYAPAK 3 Roll

AKYAPAK – AKBEND 3 ROLLER HYDRAULIC BENDING MACHINES

Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm up to 140 mm for thickness and from 1000 mm to 6000 mm for width.

Some features of Akyapak’ s 3 roller Hydraulic Plate Bending Machines are :

- All Rolls are hydraulically driven.

- Up & Down movements of the side rolls are hydraulically powered.

- Drop-end ( cover ) controlling system to open and close from control panel.

- Top roll tilts up

- Rolls are driven by 3 separate hydraulic motors and gearbox ( up to 230 mm diameter )

The frames of the machines are welded steel construction. The roll shafts, bearings used in production are good ( European ) quality. Also the torque limits of the machines are very high.

Spherical bearings are used for the rolls to minimize frictional resistance, which improves the capacity of the machines.

Akyapak machines are designed with 3D CAD programs and all calculations are carefully checked with analyzing programs by experienced high skilled engineers before productions are started. All necessary electrical and hydraulic safety precautions are taken by Akyapak technical staff. The specifications of Akyapak Machines are harmonious to CE norms.

TECHNICAL SPECIFICATIONS OF AHK 20/25 mm PLATE BENDING MACHINE

Working Length	2.100 mm
Maximum Thickness	30 mm
Pre-bending (Ø min = Top roll Ø x 3)	25 mm
Top Roll Ø	360 mm
Side Rollers Ø	330 mm
Motor Power	19 KW
Length	4.500 mm
Height	2.000 mm
Width	1.900 mm
Weight (ABOUT)	9.400 kg

STANDARD EQUIPMENT

Machine body is steel construction (ST-52).

All rollers mounted in bearing

Cover controlled from control panel in order to release easily bended metal sheet and lifted upper rolls.

Movement and parallelism adjustment of the rollers controlled from the control panel. (Ergonomic designed control panel which allows to control all the functions of the machine is independent from the machine.)

Rolls are driven by 3 Hydraulic motor and reducer.

Electrical and hydraulic protection against overloads.

Suitable to “CE”.

Cone bending device (Cone bending is achieved easily by controlling bottom and side rolls from control panel)

Induction hardened rolls

Digital display

OPTIONAL EQUIPMENT

Variable speed of rotation
Side supporters for big sheet metal diameters (For bending big diameters, side supports must be used in order to prevent from the material’s deformation by its own weight, as well as upper support)
Central supporter for big sheet metal diameters (For bending big diameters, side supports must be used in order to prevent from the material’s deformation by its own weight. 2.500 KG
Material Feed Table ( 2 m * 2 m )
Oil Cooling System