Mesin Laser Potong Cutting Plat merk Golden Laser type YAG

 “Golden Laser” Large – Scale Metal Laser Cutting Machine – type GJMSJG-150300DT 800W

Main Technical Parameters

Laser type	YAG lamp pump solid state laser generator
Laser Wave length	1064 nm
Laser power	800 W
Effective Cutting area	1500mm x 3000 mm
Working Table	Saw tooth working table (pneumatic clamp and pneumatic loading device are for optional)
Moving system	Digital offline control system, YASKAWA servo motor, ABBA high precision ball screw and REXROTH linear guide transmitting system
Laser Head	Suspension type anti collision head imported from Australia
Lubrication System	Automatic Lubrication System
Cutting Speed with cooling compressed filter air	0 - 50 mm/s, speed change due different metal, different thickness
Choose cooling compressed filtered gas as cutting gas, then need	Air compressor + air refrigerated dryer + gas holder (for optional)
Choose other cutting gases	Industrial O2 and Industrial N2
Min cutting kerf	0.15 mm (1 mm thickness)
Min bore diameter	0.2 mm (1 mm thickness)
Position accuracy	± 0.05 mm
Max groove depth	8-10mm carbon steel, 6-8mm stainless steel, 3-4mm alumunium, 2-3mm brass and cooper
Cooling system	Full scale interior circulation air condition, enduring high and low temperature type water chiller system
Format supported	PLT, DXF, AI, DST etc
Software	Golden laser professional laser cutting and automatic nesting software
Power supply	380V±5% 50HZ
Main power/Whole power	22 kW

Mesin laser ini bisa dilengkapi untuk pemotongan pipa (laser pipe cutting) dengan tambahan biaya tentunya.

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching), press (stamping), plasma cutting (potong plasma) dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

sheetmetalmachine.blogspot.com atau mesinfabrikasi.blogspot.com

Mesin Multi fungsi Punching, Shearing dan Notching plat, Potong siku, sudut, profil, round bar, square bar dll

  “YSD” Q35Y – 20 IRON WORKER

 

Technical specifications:

* Flat bar shearing Width x Thickness mm              :       330 x 20 ; 480 x 10

                Square bar mm                                             :       50 x 50

                Round bar mm                                              :       Φ 50

                Joist (type) ∆                                                 :       16#

 * Section Channel (type) ∆                                         :       16#

   Shearing T(type) mm                                                :       100 x 12

   Angle bar                                                                           

                Cutting at 90° mm                                        :       160 x 160 x 14

                Cutting at 45° mm                                        :       80 x 80 x 10

 * Punching Diameter x Thickness mm                     :       Φ 25 x 20, Φ 150 x 3.5

 * Notching

                Notching die L x W x T mm                         :       100 x 52 x 13

 * Flanging die (one stroke) L x T ∆ mm                    :       500 x 3

                                                                                                250 x 15

 * Tube notching ∆ mm                                                :       Φ 108

* Shutter die ∆ mm                                                      :       96 x 9 x 2 x 3

* Punching force KN                                                   :       800

* Max. stroke of the cylinder mm                             :       80

* Depth of throat mm                                                 :       330

* Motor power KW                                                     :       5.5

* Overall dimensions L x W x T mm                          :       1820 x 790 x 1790

* Approx. weigth kg                                                    :       1800

Note ∆ : for optional

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com atau Saldy@pt-tmu.co.id, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.