DISH END PRESS BMB-P-400x4000
DISH END PRESS BMB-P-400x4000
TECHNICAL SPECIFICATIONS
|
Piston working stroke
|
500 mm
|
|
Uprights distance
|
4100 mm
|
|
Max. Working pressure
|
250 bar
|
|
Nominal force
|
400 tons
|
|
Piston descent speed max.
|
8 m/min
|
|
Piston working speed max.
|
110 cm/min
|
|
Piston fast return speed max.
|
8m/min
|
|
Total power
|
77 kw
|
|
Max. Length mm
|
6.000
|
|
Max. Width mm
|
5.600
|
|
Max. Height mm
|
4.000
|
|
Weight (appr.) kg
|
66.000
|
Specifications and machines appearances are
subject to change without notice.
STRUCTURE
·
The machine frame
built of high strength materials. All body parts welded and stress relieved
prior to machining in order to meet tight manufacturing tolerances for
appropriate assembling and maintenance
·
The dies made of
special grade of material and heat treated.
·
All groups
undercoated of special quality of chemical for high corrosion resistance
·
Safety barriers at
top of the press body and stair for maintenance.
·
All cylinder bodies
and pistons are hardened and tempered, chrome plated and grounded
·
Low number of
greasing points by using self-lubricated components and besides that long
lifetime
COMPONENTS
The machine
is equipped with a colored Touch Panel SIEMENS.
Easy to operate main cylinder, manipulators positions, to stop/start at
any position, and diagnostic/alarms of all the functions. All controls can be
seen on screen and buttons on control pulpit. Electric motors to power
hydraulic pumps.
STANDARD EQUIPMENT
Main groups;
-
Mobile control pulpit
-
Press body
-
Front manipulator
-
Rear manipulator
·
Fully hydraulic
machine
·
Die holder unit on
the main cylinder x1
·
Speed fast-slow
selection of the main cylinder
·
Main cylinder
digital position read out
·
Working pressure
manometer x1
·
Hydraulic
components Parker or equivalent
·
Electrical
components Siemens, Telemecanique, Schneider
·
All the controls on
control pulpit by only one operator
·
Independent control
of the manipulators, synchronized with main cylinder movements x2
·
Motorized rolls in
order to rotate the plate x2
·
Counting and
presetting of the main cylinder movements and plate rotation
·
Air cooling system
for hydraulic oil x2
·
Stair for cylinder
maintenance
·
Emergency button
·
Instruction Manual
in English, hydraulic and electric projects, foundation drawing and all other
tools required to operate the machine
TERMS AND
CONDITIONS
WARRANTY:
-
12 months or 2500
working hours (which comes first) after the first date of installation
completed. 18 months from the shipment date from manufacturer factory. The
machine is under warranty of any defective materials, workmanship or standard
equipment.
-
Any reparation by
any other party without written approval of manufacturer breaks the warranty.
Manufacturer is the only one responsible to fix the problem in such cases and
this service cost will be charged to customer.
-
If any part change
is required under warranty period, it is subjected to same warranty and its
warranty starts at the date of mounting.
-
If customer
requires a service technician/engineer from the manufacturer during the
warranty period, this service price will be quoted and agreed with customer.
-
Any part which
slides are subject to wearing so is not covered by warranty
-
The defects caused
of purposeful or inaccurate usage of machine is not under warranty. This will
be evaluated by the manufacturer during the service time by the responsible
technician/engineer.
-
Manufacturer is not
responsible for any monetary loss of the customer due to machine breakdown even
the reparation is under warranty.
-
If the reparation
requires a functional test or trial after the completion, the cost of required
plate/piece under responsibility of the customer. If one trial is not
sufficient to check, more trials can be required by manufacturer in the same
condition.
DELIVERY:
-
Price includes the
delivery, the manufacturer will inform to customer about the date of shipment
and delivery. The customer should warn to manufacturer in written for any law,
rule, vacations, road construction
work or any other issue at the customer country which may affect the delivery
date. Otherwise, the manufacturer is not responsible of any delay or penalty.
-
The insurance cost
is under responsibility of the customer if required. The manufacturer is not
responsible for any damage occurred during the transportation.
-
The manufacturer
doesn’t accept any penalty if it not specified and agreed on the order
confirmation.
-
In case the
customer requires functional test at the manufacturer location prior to
shipment, the labor, plate, energy or other expenses will be charged to
customer. This will be quoted and agreed with the customer prior to test.
INSTALLATION
AND TRAINING:
Foundation drawing to be sent
to customer after the order confirmed.
User manual will be given customer
after the installation completed.
The electric and air line
connections and wiring, their channels, covers which may require for open
foundation zones etc., should be provided by the customer.
Untuk pasar Indonesia AKYAPAK - AKBEND menunjuk perusahaan saya PT Tecno Mesin Utama sebagai Agen Sales serta Service
Selain itu PT Tecno Mesin Utama memegang keagenan untuk servis dan sales untuk beberapa brand ternama seperti
- AKYAPAK (Plate Bending Roll Machine, Profile Bending Roll Machine, CNC Beam Drilling Machine, CNC Plasma Cutting Machine, CNC Flange Drilling Machine, CNC Plasma Oxy Drilling Machine, Self Align Rotator, Positioner, Coloum Boom, dll)
- YSD (Press Brake, Guillotine Shearing, Iron Worker, Power Press, Notching, dll.)
- BAYKAL (Press Brake, Swing Beam Shear, Laser Cutting, Turret Punching, Index Punch, Plasma Cutting, Water Jet dll.)
- JFY (CNC Turret Punch)
- JORNS AG (CNC Folding and Shearing Machine)
- WOOJIN (Panel Punching Press, Bush Bar Bender, Bush Bar Cutter, Bush Bar Punch, dll)
- GOLDEN LASER (YAG Laser, Fiber Laser and CO2 Laser Machine)
- COSEN (Band Saw, Billet Saw, Vertical Saw)
Jika anda tertarik atau berencana membeli mesin-mesin diatas, anda dapat mendiskusikannya terlebih dahulu dengan saya.
Hubungi nomor HP: 0813-45026234 atau 0858-22116234
atau email ke kurniawan.saldy@gmail.com atau saldy@pt-tmu.co.id
Persyaratan :
