Tampilkan postingan dengan label akyapak. Tampilkan semua postingan
Tampilkan postingan dengan label akyapak. Tampilkan semua postingan

Mesin Drilling Beam CNC + Bandsaw + Marking Device

Mesin Drilling Beam CNC + Bandsaw + Marking Device

Mesin Drilling Beam CNC + Bandsaw + Marking Device

                  INTRODUCTION OF OUR 1ADM 600 CNC DRILLING MACHINE

The beam drilling center is considered as an integrated system.

And this system is consisting of Input Conveyor + Beam Drilling Center + Marking Unit + Output Conveyor.

With the 1ADM 600 CNC (Computer Numeric Control) you will be able to control all the machine systems.
To drill the steel beams used on metal bridges and constructions, the profile should be located on the input conveyor. Then it will be brought to its position by the CNC Control with servo motor unit.

The ADM 600 CNC Machine blocks the positioned beam with hydraulic remoted special clamp jaws. The drilling process is performed by 1 Drilling Unit on 3 different axis. The drilling unit is controlled on their axis with the servo motor through the CNC, special variable screw drive groups and liner ball bearings. The drilling tools have got internal cooling system with pressure air-cooling water spray. The spindle has got 2 pcs ATC with 4 tools capacity.
We are using Mitsubishi servo motors, Thomson Neff (INA) screw drives, INA linear guides, Parker hydraulics and Rohm drills blocking unit on our machine.

Marking process is performed by dot system on beam side with a special machine. This process could be completed as an independent step at any time. There is no need to feed the material to the machine while marking because the marking head turns by CNC and move 150 mm horizontally.

Processed beams will be carried to the output conveyor. The carriers of the output conveyor are conducted with a reducer.

In order to facilitate the movement of the beam on the conveyor, there is a CLUTCH which allows cutting the mechanical connection between the carriers and the gearbox with motor.

 

INFEED CONVEYOR (FOR BARS UP TO 12 Meters) OPTIONAL 20 Meters

Powered roller way to feed up to 12 meters. Rolls are suitably spaced to allow the eventual insertion of cross loading tables.

a. rolls centerline distance                                  750 mm in the first conveyor
b. rolls centerline distance                                 1500 mm in the other 3 conveyors
c. rolls real width                                              650 mm
d. drive motor                                                  servo control

WORKING UNITS

MONO DRILLING HEAD

Drill heads of mono spindles model, in normal position it drills the center of the profile , at –90° drills the left side of the profile , at +90° drills the right side of the profile.
-90° or +90° positioning is performed by servomotor and the drill head get locked mechanically to the desired position. To take mono spindle to other positions first the mechanical lock getting unluck then it comes to the desired position by servo motor.

            Maximum drilling capacity at 52 KG/mm² tensile strength 32 mm
           
Spindle main motor: 7 kW (continuous power)
           
            Sensitive driver speed change unit ensuring rapid feed, drilling and rapid return of the drill. The system, there is no need to adjust cams, and also possible to use twist drills of different lengths to compensate material distortion thus reducing the cycle time.

            Mist air-oil coolant system operated  pneumatically and has got 2 different coolant systems.


Hydraulic double jaw vice assembly;

Automatic hydraulic double jaw vice assembly ensuring positive clamping of the work piece during the drilling operation, both horizontally and vertical.

Clamping jaws can operate unilaterally fixed reference for the working area on the beam flange. Clamping jaws close and open automatically and their control is included in the working cycle. No special program functions are required, holes by reference to the working area axis can be drilled as per program.


OUTFEED CONVEYOR (FOR BARS UP TO 12 M)

Carriage supporting structure for 12 meters long sections as standard, optional up to 20 meters conveyor can be requested.

Carriage is made by pincher for longitudinal positioning of the profile, controlled by CNC. The pincher can be rotated and adjusted to clamp both working area and flange of the section its arm can be lifted by operator by means of push button through an a.c. motor

                     Roll centerline distance         750 mm and 1500 mm
                 
                     Rolls real width                        650 mm
                                          

HYDRAULIC AND PNEUMATIC SYSTEM

Hydraulic power pack is generating the high working pressure as well as the low pressure for the working units and for the auxiliary circuites.

Hoses and connections

Circuit for cooling with air-oil heat exchanger

Hydraulic system is completed by solenoid valves and connected hoses.

Pneumatic system consists of solenoid valves and it is connected to machine system.

Electric system cabinet containing power and control equipments for the units positioning axes and for the auxiliary services. Control cabinet and electric cabinet are cooled by ventilator, also coolant air is filtered as well.
.

OPTIONS FOR THE INFEED CONVEYOR

4 meters extension to the infeed conveyor with respect to the standard length to allow processing of bars up to 12 meters long.

8 meters extension to the in feed conveyor with respect to the standard length to allow processing of bars up to 20 meters long.

 

TECHNICAL FEATURES OF 1ADM 600 CNC DRILLING MACHINE


Control Panel
CNC ( PC MITSUBISHI )
Mono Spindle Unit
1 ( working in 3 directions )
Drilling Diameter Ø
10 – 32 mm
Number of Spindle Turning per Minute
200 – 3000 rpm
Spindle Motor Power
7 kW
Maximum H - Beam
600 * 300
Tool Changing Unit
1 ATC with 4 tools
Threading – Tapping Unit
Optional
Input Conveyor Length
12 meters , Standard
Output Conveyor Length
12 meters , Standard
Central Lubrication System
Standard
TOOL COOLING
1.    Cooling Fluid / Air Micro Spray System for external cooling.
2.    Cooling fluid / air micro spray system from inside of the tool ( through spindle unit) for the internal cooling.
STANDARD
While changing internal cooling to external cooling ; the pressured air and coolant liquid hose need to be connected to external cooling joint.
Swarf Container
Optional ( Needs a special channels on the foundation floor )
Internal Cooling for Electronic Control Panel
Standard
Internal Cooling for Electronic Control Panel with Air-Condition
Standard
Technical Documentation
Standard
Maximum linear weight of the section
300 Kg

 

 

 

 

 

 

 

 

 

 

 

 

CAPACITY  OF 1ADM 600 CNC DRILLING MACHINE



ANGLE

minimum

mm

80 * 80 * 8

maximum

mm

250 * 250 * 28

U CHANNEL

minimum

mm

80 * 45 * 6

maximum

mm

400 * 110 * 14

HEA

minimum

mm

96 * 100 * 5

maximum

mm

600 * 300 * 30

HEB

minimum

mm

100 * 100 * 6

maximum

mm

600 * 300 * 15,5

HEM

minimum

mm

120 * 106 * 12

maximum

mm

572 * 306 * 21
H WELDED
PROFILE

maximum

mm

600 * 300 * 80

IPE

minimum

mm

80 * 46 * 3,6

maximum

mm

600 * 220 * 19

IPN

minimum

mm

80 * 42 * 3,9

maximum

mm

550 * 200 * 19

 

 

ADM 600 CNC DRILLING MACHINE




MODEL
QTY.
1ADM 600 CNC DRILLING MACHINE STANDARD WITH 12 METERS INFEED & 12 METERS OUTFEED CONVEYORS
 + BANDSAW
 + MARKING DEVICE

1

1
1

STANDARD

OPTIONAL
OPTIONAL