Mesin Laser Potong Cutting Plat merk Golden Laser type YAG

 “Golden Laser” Large – Scale Metal Laser Cutting Machine – type GJMSJG-150300DT 800W

Main Technical Parameters

Laser type	YAG lamp pump solid state laser generator
Laser Wave length	1064 nm
Laser power	800 W
Effective Cutting area	1500mm x 3000 mm
Working Table	Saw tooth working table (pneumatic clamp and pneumatic loading device are for optional)
Moving system	Digital offline control system, YASKAWA servo motor, ABBA high precision ball screw and REXROTH linear guide transmitting system
Laser Head	Suspension type anti collision head imported from Australia
Lubrication System	Automatic Lubrication System
Cutting Speed with cooling compressed filter air	0 - 50 mm/s, speed change due different metal, different thickness
Choose cooling compressed filtered gas as cutting gas, then need	Air compressor + air refrigerated dryer + gas holder (for optional)
Choose other cutting gases	Industrial O2 and Industrial N2
Min cutting kerf	0.15 mm (1 mm thickness)
Min bore diameter	0.2 mm (1 mm thickness)
Position accuracy	± 0.05 mm
Max groove depth	8-10mm carbon steel, 6-8mm stainless steel, 3-4mm alumunium, 2-3mm brass and cooper
Cooling system	Full scale interior circulation air condition, enduring high and low temperature type water chiller system
Format supported	PLT, DXF, AI, DST etc
Software	Golden laser professional laser cutting and automatic nesting software
Power supply	380V±5% 50HZ
Main power/Whole power	22 kW

Mesin laser ini bisa dilengkapi untuk pemotongan pipa (laser pipe cutting) dengan tambahan biaya tentunya.

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching), press (stamping), plasma cutting (potong plasma) dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

sheetmetalmachine.blogspot.com atau mesinfabrikasi.blogspot.com

Mesin Multi fungsi Punching, Shearing dan Notching plat, Potong siku, sudut, profil, round bar, square bar dll

  “YSD” Q35Y – 20 IRON WORKER

 

Technical specifications:

* Flat bar shearing Width x Thickness mm              :       330 x 20 ; 480 x 10

                Square bar mm                                             :       50 x 50

                Round bar mm                                              :       Φ 50

                Joist (type) ∆                                                 :       16#

 * Section Channel (type) ∆                                         :       16#

   Shearing T(type) mm                                                :       100 x 12

   Angle bar                                                                           

                Cutting at 90° mm                                        :       160 x 160 x 14

                Cutting at 45° mm                                        :       80 x 80 x 10

 * Punching Diameter x Thickness mm                     :       Φ 25 x 20, Φ 150 x 3.5

 * Notching

                Notching die L x W x T mm                         :       100 x 52 x 13

 * Flanging die (one stroke) L x T ∆ mm                    :       500 x 3

                                                                                                250 x 15

 * Tube notching ∆ mm                                                :       Φ 108

* Shutter die ∆ mm                                                      :       96 x 9 x 2 x 3

* Punching force KN                                                   :       800

* Max. stroke of the cylinder mm                             :       80

* Depth of throat mm                                                 :       330

* Motor power KW                                                     :       5.5

* Overall dimensions L x W x T mm                          :       1820 x 790 x 1790

* Approx. weigth kg                                                    :       1800

Note ∆ : for optional

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com atau Saldy@pt-tmu.co.id, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

Mesin Bending Roll Profile Siku Hollow H Beam U Channel Strip merk AKYAPAK

Mesin Bending Roll Profile Siku Hollow H Beam U Channel Strip merk AKYAPAK

TECHNICAL SPECIFICATIONS OF APK 101 PROFILE BENDING MACHINE

Section Modulus	45 -80 cm3
Rolls Ø	315 mm
Shaft Ø	100 mm
Motor Power	11 KW
Bending Speed	5.4 m/min
Length	1435 mm
Height	1680 mm
Width	1220 mm
Weight	2240 kg

·       Data based upon steel 240 N/mm²  Yield Point.

The shafts are made of NiCrMo alloyed steel. The surface of the rolls are hardened by induction technique.

All types of the machines are produced in our own facilities. AKYAPAK machines are designed by our engineers with C.A.D. technologies. The shafts, rolls and gear system of the machine are produced by CNC machines. After first quality control, the components assemble by professional staff carefully. Then the machine is tested by quality control staff and is painted according to customer request.

 

STANDARD EQUIPMENT

·      Machine is fabricated of steel construction.

·      Rolls are driven by hydraulic motor + reducer.

·      Hardened rolls.

·      Shafts made of special steel, hardened and grounded.

·      1 directional manual adjustable guide rolls.

·      Horizontal – vertical working.

·      Torque limiting device protecting from overload during bending.

·      Lower rolls hydraulic moveable up and down.

·      Digital display for lower rolls.

·      Separate and moveable control panel.

·      Hydraulic and electric installation Bosch, Parker, Siemens, Telemecanique.

·      Manuel lubrication.

·      400 Volt / 50 Hz.

·      Suitable for “CE”.

Use and adaptation of Akyapak equipment is very simple.

We have in stock all kinds of hydraulic, electric, bearing and gearboxes spare parts in case of machine failures and also easy and quick services for all products are available.

All spare parts in Akyapak equipment are produced by such worldwide known suppliers as Siemens, Bosch, Rexroth, and Parker.

All Akyapak machines are confirmed with CE norms.

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

Mesin CNC Turret Punch / Pon merk JFY

“JFY” CNC Turret Punch Press type: VT-300 – 1250 x 2500

Technical Specifications:
Specifications Unit VT-300
Press capacity Ton 30
Max. Table size mm 1250 x 2500
Max. material weight Kg 150
Max. sheet thickness mm 6.35
Turret capacity pcs 32 tools (2 indexing)
Axis Travel X x Y mm 1250 x 1250
Punching accuracy mm ±0.10
Strokes per minute hpm 600
Hits per 25mm hpm 350
Max. feeding speed m/min 85
Turret rotation speed rpm 30
Control axis pc 4
CNC system FANUC
Max.hole diameter mm Ø 88.9
Air pressure mpa 0.6
Air flow m³/min 0.4
Outline dimensions mm 5270 x 2500 x 2466
Total weight Ton 21
Type Closed-type


Including Equipments:
• H+L Hydraulic System
• Fanuc CNC System 10.4\” Graphic Screen
• Fanuc Electric and Drive Module
• Fanuc Servo Motor
• 32 Sets Standard Tools （Made in Wilson USA )
• 2 Index Station
• Processing Plate : 1250 x 1250 mm (Without Repositioning)
• THK or Rexroth Linear Guideway
• THK or Rexroth Ball Screws
• NSK OR INA OR Nachi Ball Screw Bearing
• SMC or Festo Pneumatic component
• Schneider Main Electric Component
• Ball and Brush Mixed Worktable
• Typed Body, Floating Clamp
• 380 Volt/3 Phase/50 HZ Voltage
• Holland and Landon Paint
• Metalex CAD/CAM Software for Nesting

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com atau Saldy@pt-tmu.co.id, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.