Mesin Bending Roll Profile Siku Hollow H Beam U Channel Strip merk AKYAPAK

Mesin Bending Roll Profile Siku Hollow H Beam U Channel Strip merk AKYAPAK

TECHNICAL SPECIFICATIONS OF APK 101 PROFILE BENDING MACHINE

Section Modulus	45 -80 cm3
Rolls Ø	315 mm
Shaft Ø	100 mm
Motor Power	11 KW
Bending Speed	5.4 m/min
Length	1435 mm
Height	1680 mm
Width	1220 mm
Weight	2240 kg

·       Data based upon steel 240 N/mm²  Yield Point.

The shafts are made of NiCrMo alloyed steel. The surface of the rolls are hardened by induction technique.

All types of the machines are produced in our own facilities. AKYAPAK machines are designed by our engineers with C.A.D. technologies. The shafts, rolls and gear system of the machine are produced by CNC machines. After first quality control, the components assemble by professional staff carefully. Then the machine is tested by quality control staff and is painted according to customer request.

 

STANDARD EQUIPMENT

·      Machine is fabricated of steel construction.

·      Rolls are driven by hydraulic motor + reducer.

·      Hardened rolls.

·      Shafts made of special steel, hardened and grounded.

·      1 directional manual adjustable guide rolls.

·      Horizontal – vertical working.

·      Torque limiting device protecting from overload during bending.

·      Lower rolls hydraulic moveable up and down.

·      Digital display for lower rolls.

·      Separate and moveable control panel.

·      Hydraulic and electric installation Bosch, Parker, Siemens, Telemecanique.

·      Manuel lubrication.

·      400 Volt / 50 Hz.

·      Suitable for “CE”.

Use and adaptation of Akyapak equipment is very simple.

We have in stock all kinds of hydraulic, electric, bearing and gearboxes spare parts in case of machine failures and also easy and quick services for all products are available.

All spare parts in Akyapak equipment are produced by such worldwide known suppliers as Siemens, Bosch, Rexroth, and Parker.

All Akyapak machines are confirmed with CE norms.

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (swing beam shearing), gunting plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching or turret punching), press (stamping), deep drawing (hydraulic press), plasma cutting (potong plasma), laser, water jet, marking, engraving, dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

Mesin Gulung Siku Pipa Profil Flat Bar Hollow Merk AKYAPAK

 

APK 121  PROFILE  BENDING  MACHINE

                 TECHNICAL SPECIFICATIONS OF APK 121 PROFILE BENDING MACHINE

Section Modulus cm3	70-120
Rolls Ø	390 mm
Shaft Ø	120 mm
Motor Power	15 KW
Bending Speed	4 m/min
Length	1985 mm
Height	2040 mm
Width	1450 mm
Weight	4.720 kg

·      Data based upon steel 240 N/mm²  Yield Point.

The shafts are made of NiCrMo alloyed steel. The surface of the rolls are hardened by induction technique.

All types of the machines are produced in our own facilities. AKYAPAK machines are designed by our engineers with C.A.D. technologies. The shafts, rolls and gear system of the machine are produced by CNC machines. After first quality control, the components assemble by professional staff carefully. Then the machine is tested by quality control staff and is painted according to customer request.

MODEL	QUANTITY
APK 121 HYDRAULIC PROFILE BENDING MACHINE (WITH STANDARD EQUIPMENT)	1	STANDARD
HYDRAULIC GUIDE ROLLS	1 SET	STANDARD
SPECIAL GUIDE ROLLS FOR ANGLE MATERIALS	1 SET	STANDARD
DIGITAL DISPLAY	1	STANDARD

STANDARD EQUIPMENT:

·      Machine is fabricated of steel (ST-52) construction.

·      Rolls are driven by a hydraulic motor + reducer (planetary gearbox and gears).

·      Hardened rolls.

·      Shafts made of special steel, hardened and grounded.

·      Guide rolls a in TWO directions hydraulic adjustable.

·      One set standard rolls

·      Horizontal – vertical working.

·      Torque limiting device protecting from overload during bending.

·      Lower rolls hydraulic moveable up and down.

·      Digital display for lower rolls.

·      Separate and moveable control panel.

·      Hydraulic and electric installation Bosch, Parker, Siemens, Telemecanique.

·      Manual lubrication.

·      400 Volt / 3 phase / 50 Hz.

·      Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates.

OPTIONAL EQUIPMENTS

·      Special rolls for tubes, profiles and angles

·      Special tooling systems for bending U, I, H profiles

·      Spiral bending device

·      Variable Speed rotation

·      Digital display for hydraulic guide rolls

·      NC Playback Control System

·      CNC Graphic Control System

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching), press (stamping), plasma cutting (potong plasma) dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.

Mesin Bending Siku Profile Pipa H Beam Kanal U C

APK 81 Mesin  Profile Bending

Spesifikasi mesin

Roll Diameter  (Standard rolls)	245 mm
Side Shafts Ø	80 mm
Rotation speed	4,2 m/min
Motor Power	5,5 + 1,5 KW
Length	1375 mm
Height	1540 mm
Width	1040 mm
Weight	1600 kg

The shafts are made of NiCrMo alloyed steel. Permukaan dari rolls dikeraskan dengan teknik induksi.

The machine is equipped with universal rolls. For each shaft, we supply 3 rolls as standard. (Total : 9 standard rolls)  The surface of the rolls is not damaged for several years when the machine used in heavy jobs. For sensitive and special bending operations, we will recommend you special rolls. Ex : for tubes, angles.

All types of the machines are produced in our own facilities. Our engineers with C.A.D. technologies design AKYAPAK machines. CNC machines produce the shafts, rolls and gear system of the machine. After first quality control, the components assemble by professional staff carefully. Then the machine is tested by quality control staff and is painted according to customer request.

 

MODEL	QUANTITY
APK 81 HYDRAULIC PROFILE BENDING MACHINE (WITH STANDARD EQUIPMENT)	1	STANDARD
HYDRAULIC GUIDE ROLLS FOR TWO SIDES INCLUDING SPECIAL GUIDE ROLLS FOR ANGLE MATERIALS	1 SET	OPTIONAL

STANDARD EQUIPMENT

·      Machine body is steel (ST-52) construction.

·      Vertical Bending Shafts.

·      Electric drive on top roll  via electric motor and reducer and gears.

·      Hardened rolls by induction technique.

·      Up and down moving of the both lowers rolls via hydraulic

·      In one direction adjustable manual guide rolls

·      Shafts made of special steel (42CrMo4), hardened and grounded.

·      Automatic speed compensation between the top roll and the two lower rolls without power loses.

·      Universal bending rolls that can be combined for bending most kind of beams, which means :

-Angle bar leg in and leg out

-T-bar leg in and leg out

-Flat bar on flat and on edge

-I, U and H beams the easy way

-Small square and round bars.

·      Digital display for lower rolls.

·      Hardened gears running in oil.

·      Control Panel from which all the functions of the machine can be controlled including speed control of the roll rotation and roll adjustment.

·      One set standard rolls

·      Horizontal – vertical working.

·      Torque limiting device protecting from overload during bending.

·      Separate and moveable control panel.

·      Hydraulic and electric installation Bosch, Parker, Siemens, Telemecanique.

·      Manual lubrication.

·      400 Volt / 3 phase / 50 Hz.

·      Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates.

OPTIONAL EQUIPMENTS

·      Special rolls for tubes, profiles and angles

·      Special tooling systems for bending U, I, H profiles

·      Spiral bending device

·      Variable Speed rotation

·      Hydraulic adjustable guide rolls in two directions

·      Digital display for hydraulic guide rolls

·      NC Playback Control System

·      CNC Graphic Control System

Jika anda tertarik membeli atau berencana investasi atau sekedar diskusi tentang mesin, terutama dalam hal pengerjaan plat logam (sheet metal fabrication), seperti mesin bending (press brake), potong plat (guillotine shearing), potong sudut (notching), roll plat (roll bending machine), pon (punching), press (stamping), plasma cutting (potong plasma) dll. anda bisa menghubungi saya di nomor HP 081345026234 / 085822116234 atau email kurniawan.saldy@gmail.com, saya dengan senang hati berbagi pengetahuan tentang hal tersebut, terima kasih.